Skip to content

Summarizing texts with AI: reports, PDFs, long email threads

By the KI können editorial team7 min read

Written with AI and checked against the sources by a second AI. As of November 17, 2026. More in the notes on AI.

A 60-page report, an email thread with 40 messages, a new framework contract: an AI turns any of them into one page in seconds. The tricky part is that a bad summary sounds just as convincing as a good one. Three details in the instruction and a cross-check make it checkable, and the typical mistakes stand out.

A man sits at his desk behind a tall stack of paper, reads a page with highlighted lines and compares it with the laptop, a lamp and a shelf of binders beside him.

Key points

  • Say first what you need the summary for. A decision memo looks different from an overview.
  • Ask for the page or section behind every statement. Then you can find it in the original.
  • Split long documents into chapters. Less gets lost from the middle that way.
  • Typical mistakes: left out, twisted, added, wrongly weighted. A cross-check finds many of them.
  • Confidential documents only go into an AI your company has approved for them.

Four ways a summary goes wrong

An AI summarizes by writing a new, shorter text. It can get things wrong along the way without the result showing it. Four mistakes come up again and again:

Typical mistakes in summaries
MistakeExampleHow to find it
Left outThe exception in section 7 is missing, even though it applies to you.Ask what is not in the summary
Twisted“should” becomes “must”, “up to” becomes “exactly”.Reread the key sentences in the original
AddedA figure or a reason that does not appear in the text.Ask for the source location of every figure
Wrongly weightedA side remark is at the top, the core point at the bottom.Skim the table of contents yourself

In the trial lesson you put your first instruction together and get feedback. No account, in a few minutes. Start the trial lesson

Purpose first: for whom and what for

Courtney is a policy officer at a trade association for skilled crafts. She gets a study of more than 50 pages on the shortage of skilled workers and is supposed to brief the board. “Summarize this” gets her a synopsis. What she needs is something else: what in it affects the member businesses, and does the association need to act?

Sample instruction
I’m a policy officer at a trade association for skilled crafts. A study is attached.
Summarize it for the board, which has ten minutes to decide whether we write a statement on it.
Structure: 1. The core message in two sentences. 2. Five findings that affect small trade businesses. 3. What the study did not examine.
Give the page for every point.
Figures only if they appear exactly like that in the study. No assessment of your own.

Point 3 is often missing from summaries, yet it is exactly what protects the board from drawing the wrong conclusions. Courtney checks every figure on the page given and reads the study’s introduction and conclusion herself.

Choosing the right format

“Short” means something different to every reader. Tell the AI which format you need. These four cover most cases:

Formats of a summary
FormatWhat forWhat you say in the instruction
Three sentencesOverview for busy readers, opening of an emailCore message, main consequence, what is open
Decision memoManagement, board, committeeWhat is to be decided, options, deadlines, page references
TableRequirements, agreements, differencesThe columns you need, verbatim quotes where needed
Plain languageCustomers, notices, new colleaguesTarget group, short sentences, no jargon without explanation

References make a summary checkable

A summary without page numbers is something you can only believe or not. With page numbers, you can look it up. So ask for them in every instruction, and at the end check three statements at random: Is that really there, and is it there in those words?

Long documents in parts

Bryce is an engineer at an automotive supplier and receives specifications of more than a hundred pages. When he has a whole specification summarized at once, details from the middle are missing afterwards. This can happen with long texts: in a study published in 2023 and in a journal in 2024, the language models tested found information in the middle of long texts less well than at the beginning and the end. It tested questions about long texts, not summaries. Newer models may do better; splitting the text doesn’t hurt either way.

  1. Split the document by chapter and have each chapter summarized on its own.
  2. Ask for the same format for each chapter, for example: requirement, section number, mandatory or optional.
  3. Have the chapter results merged into one table at the end.
  4. Spot checks: reread two requirements per chapter in the original.
Sample instruction
Here is chapter 4 of a specification.
List every requirement as a table row: section number | requirement in one sentence | mandatory or optional (as in the text) | numerical values with units.
Copy numerical values and units unchanged. If a requirement is worded unclearly, write “unclear” and quote the sentence.

Bryce pays particular attention to the “mandatory or optional” column. This is where twisted mistakes happen, and a “should” that turns into a “must” changes the quote he sends.

Getting up to speed on email threads

Allison is taking over a project in inside sales after parental leave. The thread with the customer has 40 emails, many of them replies to replies. She wants to know what has been agreed and what is still open.

Sample instruction
Here is an email thread, oldest email first. Names have been replaced by roles (customer, purchasing, engineering, sales).
Give me:
1. What has been agreed? With the date of the email where it says so.
2. What is open? Who said they would take care of it?
3. Where do emails contradict each other?
Only what is in the emails. If a commitment is unclear, quote the sentence.

Before pasting it in, Allison replaces names and addresses with roles, or she uses the AI her company has approved under a contract. She compares the list of agreements with the quote in the system before she writes to the customer.

Contracts and legal texts: an overview, not an interpretation

Dustin chairs the works council at a freight company and has to read a new works agreement (Betriebsvereinbarung, a binding agreement between employer and works council) on the shift system, 18 pages long. An AI that the company provides to the works council for this can show him where things are and what has changed from the old version. What the clauses mean legally is something it can’t tell him reliably.

Sample instruction
Here are the old and the new version of a works agreement.
List all differences as a table: section | old version (verbatim) | new version (verbatim) | what changes, in one sentence.
Quote verbatim and flag any passage you can’t clearly match.
Don’t give a legal assessment.

The verbatim quotes are Dustin’s checking tool: he searches for each one in the document. If one is missing, he knows that row is wrong. For the assessment, he gets advice from the union or a lawyer.

The cross-check: a second look in a new chat

In the same chat, the AI reads its own answer and the whole conversation along with everything else. For the check, open a new chat instead, paste in the original and the summary, and have it look specifically for mistakes.

Sample instruction
Below are an original text and a summary of it.
Check the summary:
1. Which statements are not in the original in this form?
2. Which important points of the original are missing?
3. Where has something been softened or sharpened (for example “may” to “must”)?
Give the location in the original for each finding.

The cross-check doesn’t replace your own reading. But it often finds what you would have missed the first time. More on checking is in the guide Checking AI answers.

What can go into the AI

When you upload a document, you hand it to the provider, with everything in it: names, figures, comments, sometimes earlier versions. Contracts, personnel files and customer documents only belong in a service your company has approved. For everything else, the traffic light from the guide Data protection and AI tools applies.

Just before you pass it on

  1. Purpose and reader were in the instruction.
  2. Every figure has a reference, and three spot checks are correct.
  3. Must, should and may are as in the original.
  4. Cross-check done in a new chat.
  5. The summary says what the document does not cover.

Summarizing is practice in asking questions

Good summaries start with a good question to the text. That can be practiced, on documents from your own work. The learning app “KI können” walks you through instructions like these and the checking afterwards, bite by bite; you practice with your own AI. The trial lesson shows you how on an example, without signing up.

Sources

Information as of November 17, 2026. Laws and offers can change; this article is not legal advice.